Key benefits

  • Intuitive user interface and ergonomic design
  • Easy to disassemble, carry, and set-up again
  • Multigas measurements in a portable package
  • Realtime results reliably and remotely
  • Exceptional robustness: shock and vibration resistivity by design
  • Smart software with self-diagnostics for easy and fast service
  • Suitable for on site or laboratory use
Request quotation
GT6000 Mobilis is the new frontier of portable emissions monitoring. The analyzer is specifically designed for those who aim high. It enables you to concentrate on the task at hand, without interferences from hard to use, time-consuming and unreliable tools. Sounds good, right? Do you need extreme portability, robustness and want to save time? Or reliable instrument, powerful analysis tools and rapid response times? GT6000 Mobilis provides this all and more. Read on to get the full picture of this solution.

Uncompromised Performance For Stack Monitoring

One of the most important resources for stack tester is time. You do not want to spend your time concentrating on futilities. We designed the GT6000 Mobilis so that the setup, measurements, and analysis happen smoothly and time-efficiently, in short, make your work easier. The device is simple to set up and disassemble, and there are no loose screws and other small parts that can fall while in transit or on your way to the stack. Integrated sampling line supports make it is easier to use and there are fewer parts to carry around. The device enables you to measure all key compounds at once, including oxygen with PSS Plus. For ease of use, GT6000 Mobilis gives clear OK / Not OK on the software side to indicate if the device is ready or not for measurements. The PSS on the other hand has indicator lights to tell the same thing on its part. Results are available in mere minutes.


Sidekick in Emission Research

We recognize that time, money, and effort are valuable resources for you. The ease of use, multi-gas measurements, and immediate results let you focus on what is important, your research. With GT6000 Mobilis, even the smallest concentrations are measured with high accuracy. These measurements can be monitored on-site or even remotely. Results can be accessed via PC or tablet with Calcmet software. Additionally, as sometimes the measured compounds can be unexpected, with Calcmet software you can reanalyze measurement data afterward to identify these unknown gases. The system is easy to use, which reduces the need for supervision and can be used with minimal training, whether you are working in the lab or on the field.

Power of emission monitoring system in a portable package

GT6000 Mobilis (successor to our previous model DX4000) is designed to make life easier and the system more convenient for the user. And we do not say this lightly, but this powerful tool rivals fixed systems in its features.

The system is typically set up to measure H2O, CO2, CO, NO, NO2, N2O, SO2, NH3, CH4, HCl, HF and different VOCs and can measure up to 50 gases simultaneously. Additional gases can be easily added without any hardware changes. The corrosion-resistant sample cell is heated to 180 °C, which ensures that the sample stays in the gaseous phase even with high concentrations of H2O or corrosive gases. FTIR technology ensures that results will be available immediately on-site, and further analysis provides hard data for your specific needs

Paired with Portable Sampling System

GT6000 Mobilis is designed to be used with the portable sampling system, PSS Plus or PSS Base. PSS utilizes the hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. There is two-stage particulate filtration: the first one in the sampling probe and the second one in the sampling system. The portable sampling system can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.

With all-new design the user experience has been taken to new heights. Integrated controls on front, 2 handles and cables in the back provide smooth operation. While PSS Base offers more basic design, for more hardcore work we have PSS Plus. PSS Plus comes with flow meters on front and has an instrument air option. This makes the system easier and cheaper for user while also providing safer operation, since nitrogen is only needed for background measurements.

Key benefits of PSS

  • User-friendly design
  • Instrument air option (PSS Plus)
  • Integrated controls accessible from Calcmet
  • IP42 rated

Do you want to talk to our experts about this product, or do you wish to enquire about our previous model DX4000? Leave your information below and we will get back to you. You can also leave a message to our chat or send an email to